Tech News, Magazine & Review WordPress Theme 2017
  • Home
  • Supply Chain Updates
  • Global News
  • Contact Us
  • Home
  • Supply Chain Updates
  • Global News
  • Contact Us
No Result
View All Result
No Result
View All Result
Home Supply Chain Updates

be quiet! Pure Base 500 Review: Clean Lines, Easy Build

usscmc by usscmc
February 22, 2020
be quiet! Pure Base 500 Review: Clean Lines, Easy Build
Share on FacebookShare on Twitter

For an industry that’s obsessed with RGB lighting, be quiet!’s Pure Base 500 provides a breath of fresh air for those not hooked on the latest trend. On sale for $85 / £80, this mid-tower chassis is available in three different color skus — black, grey, and white — with or without a window.

The Pure Base 500 also includes a significant number of quality-of-life PC building features. You get a full-size PSU cover, multiple fan filters for the roof — your choice of either a mesh or a semi-ventilated option — good cable management routing, housing for multiple 3.5-inch and 2.5-inch drives, support for AIOs up to 360mm, and sound dampening along the front and side panels as standard.

be quiet! Pure Base 500

(Image credit: Tom’s Hardware)

Specifications

Form Factor Mid Tower
Motherboard Support ATX, M-ATX, Mini-ITX
Colors Available White, Black, Grey
Window Variants Windowed / Non Windowed
3.5″ Support x2
2.5″ Support x5
Radiator Support 360mm front, 240mm roof, 140mm rear
Fan Support 2x 140mm/3x 120mm Front, 2x 140mm/2x120mm roof, 1x 140/120mm rear
Dimensions 450 x 231 x 443 mm
Graphics Card Clearance 369mm
CPU Tower Clearance 190mm

Unboxing and I/O

be quiet! Pure Base 500 Front I/O Panel

(Image credit: Tom’s Hardware)

Out of the box, the Pure Base 500 looks slick. Those smooth folded corners on the front panel stop it from being just another black box. The front panel is made of ABS plastic with a faux-brushed-aluminum facade, but the rest of the chassis is made from a mixture of steel and tempered glass.

As for the front I/O, you get two USB 3.0 ports, separate microphone and headphone pass-throughs, a power button, and that’s it. Ideally, here in 2020, there would be a USB-C port here as well.

Front Panel and Soundproofing

Image 1 of 3

(Image credit: Tom’s Hardware)
Image 2 of 3

(Image credit: Tom’s Hardware)
Image 3 of 3

(Image credit: Tom’s Hardware)

If you carefully pull from the bottom, you can remove the front panel. There’s no integrated RGB lighting or cables to worry about, and the panel itself is held in place via plastic pins.

Running down each edge and at the bottom of the panel are three rather thin dust filters. These have a one-inch gap between them and the front of the panel itself, giving your intake fans access to some much-needed airflow, and they can be removed for cleaning. Sound dampening material lines the front of the panel to help reduce unwanted noise.

Interestingly, be quiet! have opted for two layers of mesh with the front panel’s construction. One is the dust filter, and the other is built into the front panel itself, serving as an aesthetic feature rather than anything practical. This is likely to impede airflow intake. If you do run an AIO in the front of the chassis, we recommend you remove the dust filters entirely and rely solely on the single layer of mesh that’s permanently fixed to the panel.

Side Panels

Image 1 of 4

(Image credit: Tom’s Hardware)
Image 2 of 4

(Image credit: Tom’s Hardware)
Image 3 of 4

(Image credit: Tom’s Hardware)
Image 4 of 4

(Image credit: Tom’s Hardware)

To remove the tempered glass window, simply undo the four thumb screws located in each corner and lift the window off. The steel door on the right side is secured via two retainable thumb screws.

Similar to the front panel, right door is covered with sound-deadening material to help reduce any noise produced through vibrations. Note: This does reduce the amount of space you have for cable management.

Hot Swappable Roof Filters

Image 1 of 3

(Image credit: Tom’s Hardware)
Image 2 of 3

(Image credit: Tom’s Hardware)
Image 3 of 3

(Image credit: Tom’s Hardware)

Be quiet! ships two top dust filters in the box to utilize depending on your setup. You can either opt for the complete mesh variant — ideal for those installing 2x140mm fans in the roof, or instead go for the more solid version with the triangular cut design in the rear if noise dampening is more of a concern.

Both are constructed from a flexible plastic, and fit into position easily thanks to magnetic seals running along the inside edge of each filter.

Interior Look

Image 1 of 4

(Image credit: Tom’s Hardware)
Image 2 of 4

(Image credit: Tom’s Hardware)
Image 3 of 4

(Image credit: Tom’s Hardware)
Image 4 of 4

(Image credit: Tom’s Hardware)

Inside, there’s space in the front to mount up to a 360mm radiator, as well as an additional set of fans, as long as you remove the 3.5-inch hard drive cage below. In the roof, the Pure Base 500 also supports a slim 240mm AIO, and in the rear up to a 140mm AIO.

GPU clearance measures at 369mm (14.5 inches), and the Pure Base 500 will support CPU towers up to 190mm (7.4 inches) tall as well. PSU compatibility is also strong at 258mm, as long as you don’t opt for any bottom-mounted fans.

Another important feature is the cable management bar in the front. This doubles as a way of hiding your main 24-pin and front I/O or fan cables without the need for panel cutouts or rubber grommets. This bar also acts as an SSD mounting tray, too. Remove the cable bar from the case, pop off the be quiet! logo plate, install your SSDs with the ports facing towards the hole, reinstall back into the chassis, attach your cables, and then place the logo plate back into position.

It’s nice to see this option in a budget chassis like this. That said, the downside is that, with the SSD cables going through that center hole, it means your bottom-most SSD will be facing in a different orientation than the top one, so the label will be reversed or flipped.

Rear Cable Management

Image 1 of 6

(Image credit: Tom’s Hardware)
Image 2 of 6

(Image credit: Tom’s Hardware)
Image 3 of 6

(Image credit: Tom’s Hardware)
Image 4 of 6

(Image credit: Tom’s Hardware)
Image 5 of 6

(Image credit: Tom’s Hardware)
Image 6 of 6

(Image credit: Tom’s Hardware)

Behind the motherboard, there’s plenty of cable routing options as well, with velcro straps pre-installed. Additional straps can be found inside the included accessory box. There’s also a plethora of cable tie mounting locations and a removable SSD tray for the installation of a further two drives behind the motherboard.

The hard drive cage itself can also house an additional 2.5-inch drive in the top, and a further 2x 3.5-inch drives — although not at the same time. To install the drives, you slide them in, align with the pre-drilled holes, and secure using the included screws. Pleasingly, the holes are surrounded by rubber on either side to reduce vibrations. The cage can also be removed in its entirety, if you prefer better airflow or a thicker front radiator.

Build Log

(Image credit: Tom’s Hardware)

Our ATX “build” test bench consists of the following:

CPU Intel Core i9-9900K
Motherboard: Gigabyte Z390 Aorus Pro Gigabyte Z390 Aorus Pro
RAM 16GB (2x8GB) T-Force Pro Dark @ 3600 MT/s
GPU Nvidia GeForce RTX 2070 Super
SSD 240GB PNY CS1311 2.5-inch SSD
PSU Corsair HX750 80+ Platinum Power Supply
Cables Corsair Sleeved PSU Cables Pro Kit Type 4
Cooler Noctua NH U12A + 2x Corsair ML120 Pro Fans

Motherboard Installation

be quiet! Pure Base 500 Installation

(Image credit: Tom’s Hardware)

Our first step was to install the motherboard — complete with fans and memory. This acts as a good compatibility test, as installing your CPU tower onto the board outside of the case is far easier than the alternative. There were no major hiccups outside of a few of the stand-off screws not securing properly, which was easily rectified with alternative screws.

Power Supply Installation

Image 1 of 3

(Image credit: Tom’s Hardware)
Image 2 of 3

(Image credit: Tom’s Hardware)
Image 3 of 3

(Image credit: Tom’s Hardware)

With the motherboard in, the power supply was next up. This attaches to a bracket, which then secures to the case via four thumbscrews. When using a modular PSU, install your cables to the power supply first, then attach the bracket, and slide it all into the case.

We then installed the cables, which unlike our recent review of the Lian Li Lancool II, went without a hitch; no fans needed to be removed and there was plenty of clearance to install the CPU power. When it comes to the 24-pin ATX power, it’s best to remove the cable/SSD bar before installing it.

After that, we installed our SSD onto the bar and resecured the bar into position. When it comes to attaching the cables for your SSD, it’s best to lay the case down on its side to get easier access — and vision — to the SSD ports.

Graphics and Cable Management

Image 1 of 3

(Image credit: Tom’s Hardware)
Image 2 of 3

(Image credit: Tom’s Hardware)
Image 3 of 3

(Image credit: Tom’s Hardware)

Next, we installed the GPU and tidied up the rear cables. For our PCIe power, we opted to run the cables through one of the cutouts in the PSU cover that’s there for the front I/O connectors. Alternatively, you can run them directly through that PSU cover cutout to the right, near the hard drive cage — which you can remove to allow for bigger radiators — or behind the cable/SSD bar instead.

As for the space behind the motherboard, the Pure Base 500 comes with three velcro straps installed as standard for the 24-pin/fan cables. We opted to install an additional one at the bottom as well. Then we tidied the rest up by taking advantage of the empty space we’d created by removing the 3.5-inch hard drive cage. If we left that part installed, it would be more difficult to hide these cables. You’d have to rely on a lot more cable ties, as you’re already compromised for rear panel space, due to the additional sound-dampening material.

Build Complete

Image 1 of 2

(Image credit: Tom’s Hardware)
Image 2 of 2

(Image credit: Tom’s Hardware)

Overall, the build process was clean and simple. The Pure Base 500 is ideal for those starting a custom PC build for the first time. Not only is it affordable at $80, but it also packs in a lot of features and minor-but-appreciated details — like the cable bar and the additional velcro straps — that make building your new PC a cinch.

That said, the Pure Base 500’s stock configuration doesn’t lend itself well to good airflow. Those additional dust filters will likely hamper its performance, creating turbulence with the mesh lining the outside edges of the panel. If you’re taking advantage of an air-tower like ours is here, we’d recommend you remove the dust filters from the front panel, and move the 140mm Pure Wings 2 situated at the rear of the case to the front, to act as an additional intake instead.

MORE: Best Cases

MORE: All Case Content

usscmc

usscmc

No Result
View All Result

Recent Posts

  • How Hapag Lloyd captured a major market share in the Container Shipping Industry in USA
  • Why USA’s East Coast is the Favorite Destination for Manufacturing Companies
  • How Trade Relations Between the USA and UK Improved After Keir Starmer Became Prime Minister
  • Tips and Tricks for Procurement Managers to Handle Their Supplier Woes
  • The Crazy Supply Chain of Walmart Spanning Across the Globe

Recent Comments

  • Top 5 Supply Chain Certifications that are in high demand | Top 5 Certifications on Top 5 Globally Recognized Supply Chain Certifications
  • 3 Best Procurement Certifications that are most valuable | Procurement Newz on Top 5 Globally Recognized Supply Chain Certifications

Archives

  • July 2024
  • June 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • June 2023
  • May 2023
  • April 2023
  • March 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • October 2021
  • September 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • September 2019

Categories

  • Global News
  • Supply Chain Updates

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
  • Antispam
  • Contact Us
  • Disclaimer
  • Home
  • Privacy Policy
  • Terms of Use

© 2025 www.usscmc.com

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Non-necessary
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
SAVE & ACCEPT
No Result
View All Result
  • Home
  • Supply Chain Updates
  • Global News
  • Contact Us

© 2025 www.usscmc.com